Catering & Aquarium

Alsafe’s CO2 gas cylinders participate in the fields of soft drink and draft beer systems, planted and saltwater aquarium’s CO2 systems, greenhouse gas cycles in agriculture, and more.

Alsafe Aluminum Cylinders for

Carbon Dioxide

MATERIAL Aluminum 6061
THREAD SIZE PZ27.8 | 1.125-12UNF | Other Sizes May Be Available Upon Request
FINISH Clear Coating | Powder Coating Painting
GRAPHICS Custom Logos or Labels Available Upon Request
ModelOutside Diameter (mm)Water Capacity (l)Cylinder Length (mm)Cylinder Weight (kg)Service Pressure (bar/psi)CO2 Capacity @60% (kg / lb)
LW-108-1.5-15-H1081.52731.6150 / 21750.9 / 2.0
LW-108-1.7-15-H1081.73001.8150 / 21751.0 / 2.2
LW-108-1.9-15-H1081.93262.0150 / 21751.1 / 2.5
LW-120-3.4-15-H1203.44453.2150 / 21752.0 / 4.4
LW-140-3.8-15-H1403.84053.9150 / 21752.3 / 5.0
LW-140-5.0-15-H1405.05004.6150 / 21753.0 / 6.6
LW-140-7.6-15-H1407.67027.0150 / 21754.5 / 10.0
LW-140-8.3-15-H1408.37407.2150 / 21755.0 / 11.0
LW-203-11.3-15-H20311.355811.2150 / 21756.8 / 15.0
LW-203-13.4-15-H20313.463012.1150 / 21758.0 / 17.6
LW-203-15.1-15-H20315.170214.2150 / 21759.1 / 20.0
LW-203-16.7-15-H20316.776415.5150 / 217510.0 / 22.1
LW-203-25-15-H20325.0108522.5150 / 217515.0 / 33.1
LW-203-26.5-15-H20326.5114523.6150 / 217515.9 / 35.0
LW-232-33.3-15-H23233.3112530.5150 / 217520.0 / 44.1
LW-232-37.8-15-H232 37.8125534.5150 / 217522.7 / 50.0

Alsafe’s aluminum cylinders are constructed with aluminium alloy 6061 T-6.

When filling and refilling Alsafe cylinders, the pressure should not exceed the nominal working pressure and should be done at a temperature between -40℃ to 60℃. The threads and interior of the cylinder should be kept dry and free from any contamination.

Alsafe gas cylinders are designed and constructed in accordance with International and China domestic Standards as applicable. These Standards define the cylinders’ material, method of manufacture, test pressure, maximum permissible filled pressure, and method of periodic inspection.

Cylinders should be handled carefully to avoid impact damage. They should not be dropped or have heavy objects fall on them. Impact damage can potentially reduce the cylinder wall thickness, leading to premature cylinder rupture.

For seamless cylinders, permanent identification markings are usually found on the shoulder of the cylinders.

The stamp markings generally include the following information: Cylinder Serial Number, Manufacturer’s Identification, Hydraulic Test Pressure (in bar), Working Pressure (in bar), Empty Cylinder Weight (in kg), Actual Water Capacity (in L), Design Wall Thickness (in mm), Year and Month of Manufacture, and the Manufacturing Standard.

After each use, wash the cylinder and its accessories in freshwater and dry them, especially after use in seawater. If seawater accidentally contacts the cylinder interior, rinse it with clean freshwater immediately for 2-3 times, then blow dry the interior with clean, dry air.

For frequently used scuba cylinders, remove all components, clean and dry thoroughly at least once a month. It is recommended to remove the cylinder valve and inspect the cylinder at least every 3 months. If the cylinder shows signs of damage or corrosion, it should not be used.

Did not find what you are looking for?

Check Out Full Capacity

We listed our full range of products categorized by product type, with technical specifications available.

Contact Us

Contact us for questions, customized order request, quote request and more.

Scroll to Top
Skip to content